Table of Contents
Advertisement
8. FAQ/troubleshooting
(continuation)
3.
4.
5.
6.
7.
8-9.
10.
11.
12.
8. FAQ/troubleshooting
(continuation)
13.
14.
14.
15-16
.
What happen if my unit gets blocked?
The ULTRASONIC PORTABLE restarts after 10 minutes
thanks to the system called "watchdog".
You simply have to reset the application again and it will
work again correctly.
How can I start using the Anemotracker App?
Here is a quick start up guide so you can begin using your
device and the App.
START UP STEPS
1. First thing you need to do, is to activate both your GPS
and your Bluetooth.
2. Then, once you are in the main menu of the app, you
need to slide to the right so the "Settings" tab will show up.
3. There, you can press "SCAN", and after about 15 to 20
seconds you will see a list of the devices surrounding you,
where you can choose the one you own by pressing on it.
4. When you do that, and after another 15 to 20 seconds,
the device will connect.
You only need to do this once, the next time you start the
app, the last device you connected will connect automati-
cally.
Will it work on a rotating mast?
Not right now, but in the near future, the ULTRASONIC will
be able to compensate any rotation given, and recalculate
to display the proper data back to you.
Advertisement
Table of Contents
