Table of Contents
Advertisement
5. Application areas
(continuation)
Agriculture
Cranes
Security
Forestry
The Ultrasonic Portable can be used in such dispare
sectors, such as agricultural or nautical, through energy or
new technologies.
· Attached to any work equipment (tractor, pivot, combine
harvester, ...) can facilitate information of atmospheric
conditions to optimize processes and log information and
position.
· Generate history for study and application on farms
(reparcelling, redistribution of sprinklers, claim for dama-
ges. derived from the climatic conditions, etc).
·It can be an ideal complement for eolic sector. In particu-
lar for the production of wind power. It acts as a weather
station, but with the peculiarity of being mobile and of
being able to obtain data in real time from a state-of-
the-art device, without cables and lo them.
·To know the conditions of wind, relative humidity, tempe-
rature,... are parameters that condition certain productive
processes. They can help to optimize air conditioning and
humidity control in drying hams, cheeses, etc.
Knowing this information in a simple way and being able
to store and treat it, can contribute to the added value of
these processes and, consequently, the products resulting
from the same.
· The practice of windsurfing or kitesurfing is booming.
With the Ultrasonic Portable, the companies dedicated to
providing services to the users of these infrastructures for
the practice of these sports, could count on a Information
on the weather, soxx important for the practice of these
sports.
With all this, the Ultrasonic Portable becomes a multidisci-
plinary product, able to adapt to the needs of a wide range
of users.
6. Installation
6.1. Installing the unit
The Ultrasonic Portable has to be oriented to the bow
taking as reference the mark that appears at the top (as
shows at the image below).
As we describe you before, comes with a threaded lower
part (16 mm M16×2 female thread) that you can addapt to
your available accessories.
It is a standard measure, great variety of accessories in
the market adapt to it.
*Please check our available accesories on our website.
6.2. Installing the App and testing the unit
Follow the next steps:
1. Make sure your device is BLE compatible*.
· Ultrasonic Portable works with Android 4.3 or 4.4 or iOS
devices (4s, iPad2 orbeyond).
2. Downloadand install Sailing Anemotracker App on your
device from Google Play or Apple Store.
3. Once the App is installed start it and open the settings
menu by sliding the screen to the rigth.
4. Press button "Scan" and all Ultrasonic Portable devices
within the range should show up at screen.
5. Select your device and connect.
If your device connects with the Ultrasonic Portable
correctly, continue with the normal installation.
If not, please read the following lines.
Your device is compatible but you can not connect?
1. Make sure BT (Bluetooth) mode is running on your
smartphone, Tablet or PC.
2. Make sure Ultrasonic Portable is not on Off mode. If the
device has not been exposed to any source of light for an
extended period of time it might be necessary to keep it
under direct sunlight for a few hours. A cloudy day will
work too.
4. Make sure no other device is linked to your Ultrasonic
Portable.
Each unit can only be connected to a single device at a
time. As soon as it gets disconnected, Ultrasonic Portable
is ready to link to any other device with the Anemotracker
app installed.
For further information please contact Calypso Technical
Support.
Advertisement
Table of Contents
