Omron AX-OP05-E User Manual page 19

Lcd 5 line digital operator

Hide thumbs Also See for AX-OP05-E:

Table of Contents

LCD Digital Operator

When the inverter supports EzSQ (Drive Programming) function

· In any display mode except Write Mode and Option Mode, the read screen is

displayed after pressing the

digital operator, it will show "—".

· Use the

key to move the cursor up and down to select the

memory number where parameter setting will be stored.

· After pressing the

01: Read data

02: Read data+EzSQ

03: Verify data

04: Verify EzSQ

05: Cancel

NOTE: only three selection items 01, 03 and 05 are displayed when memory

No.2, No.3 or No.4 is selected.

· An overwritten confirming screen are displayed after the

pressed. To approve, press the

· The Read "Completed" will be displayed for 2 seconds.

· It returns to the Read Mode navigation layer automatically after the read

function is completed. The read operation date and time and inverter type will be

updated on the first line.

· Lines No. 2, No. 3 and No. 4 will display "E" as showed in the right figure.

LCD Digital Operator User's Manual v0_90 110218.doc

Key. If there aren't parameters stored in LCD

key the Select data available are:

key, if not, press the

key is

key.

Issue 0.90 Draft

Table of Contents