Table of Contents
Advertisement
FUNCTIONS
Installation
Install the product with 100mm clearance
above the product, 20mm each side, and
50mm clearance behind the product.
This will ensure the product has adequate
ventilation and will operate efficiently.
Do not place on the product on flooring
covered with carpet, overly flexible,
unstable or easily damaged by moisture.
Use information
1. Upper shelf Doors
To open upper shelf doors , lift them slightly and turn inside out.
Open the shelf door to put the food into the shelf.
Ensure the shelf door is in the closed position before
shutting the freezer door to avoid damage.
2. REMOVING DRAWERS
Pull the drawers out fully, then lift them up slightly in order to remove.
3. SUPER STORE DRAWER
Pull super store drawer out fully. Lift and pull it out of telescopic slides.
NOTE: Some models of the large drawer are set with slide structure. To remove the drawer lift up
the rear slightly and slide the drawer out.
4. ICE CUBES PRODUCTION
S
ome models are equipped with manual ice system including ice cube trays with
removal device and ice bin.
5. Remove ice trays
Clean and fill with water, Refit ice trays on its support.
Wait for a few hours for the ice to be frozen , then turn the knobs to extract the
ice cubes.
The ice cubes will fall directly into the ice container.
6. There is a storage compartment in the door of the freezer marked 'PIZZA' ,
This is designed to hold a pizza or other similar sized item.
10
Hide quick links:
Advertisement
Table of Contents
