Asus ROG STRIX X370-F Gaming Manual page 71

Ch a p t e r 4 : RAI D Su p p o r t
RA I D Su p p o r t
4.1 RAID conſ gurations
The motherboard supports RAID 0, RAID 1, and RAID 10 solution.
If you want to install a Windows
set, you have to create a RAID driver disk and load the RAID driver during OS installation.
Refer to section 4.2 Creating a RAID driver disk for details.
4.1.1 RAID deſ nitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
conſ guration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 conſ guration you get all the beneſ ts of both
RAID 0 and RAID 1 conſ gurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
ASUS ROG STRIX X370-F GAMING
operating system to a hard disk drive included in a RAID
®
4-1