Advertisement
ASSEMBLY
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service.
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 30 Minutes | DO NOT over tighten hardware!
1
Locate the Right Side Panel
the panels as shown. Place a Washer
Bolts
. Insert each Bolt with Washer through the
F
eyelets in the Right Side Panel and into the holes in the
edge of the Seat Back. Tighten using the Hex Wrench
but do not over-tighten.
hardware used:
2
Attach the Seat Panel
the Back Panel
E
: align the eyelets on the Seat Panel
with the holes in the already-joined panels as shown,
G
then insert a Bolt
aligned sets of eyelets.
Tighten using the Hex Wrench but do not over-tighten.
hardware used:
3
Locate the Left Side Panel
on the partially-assembled chair as shown. Place a
H
Washer
on each of 2 Bolts
Left Side Panel with the holes in the left edge of the Seat
Back and insert a Bolt with Washer through each of the
eyelets to connect the two pieces.
Hex Wrench
hardware used:
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
and Seat Back
A
E
on each of 2
H
F
Bolt (M6x35) x2
H
Washer x2
B
to the Right Side Panel
H
with Washer
into each of the 3
G
Bolt (M6x20) x3
H
Washer x3
D
. Place the Left Side Panel
F
. Align the eyelets on the
F
Bolt (M6x35) x2
H
Washer x2
. Align
A
and
-
E
A
E
B
D
H F
H
G
F
H
4 4
Advertisement
