Advertisement
FORCE G SERIES ASSEMBLY
NOTE: SOME IMAGES USED ARE FOR REFERENCE ONLY.
Serial Number Sticker:
Part No 60121632 Rev A
QA TO PLACE SERIAL LABEL HERE
To Get Started:
1) Remove several pieces of the packaging foam and place them on top of
a large surface/table (at least 6' x 4') to protect the parts from damage
and scratching once removed from the box. It is recommended to use a
table and have a second person to make assembly easier.
2) Remove the drive train assembly and place on foam.
3) Remove the frame assembly and backrest and place on foam.
4) Unseal the parts boxes, which should include small components and
"Small Component Verification Sheets", as well as some of the large
components below.
a.
NOTE: Some boxes may be empty which are used as filler material in
packaging.
5) Use the "Large Component and Accessory" verification checklist below
to verify that all major components are present.
6) Once you've confirmed that all large components are present, proceed
to the "Small Component Verification" step.
a.
If you discover any components are missing, please contact our
Customer Service Department with your serial number and the Part
Number / Description of the missing components.
topendorders@invacare.com
Large Component Verification and Accessory Checklist (QA
and Customer)
QUALITY CHECKLIST
1) Frame Assembly (1)
2) Drivetrain (1)
3) Footrests (2)
4) Backrest (1)
5) Positioning Strap (attached to backrest) (1)
6) Rear Wheels (2)
7) Bumper (found in wheel box) (1)
8) Safety Flag (found in wheel box) (1)
9) Accessories (if applicable)
10) Small Component Bags with Verification Sheets (4)
QA Signature & Date:
_________________________________________
2
CUSTOMER CHECKLIST
Instructions, Force G Customer Assembly
Advertisement
