Control 4 C4-KNX-BW180 Series User Manual page 42

Options:
–
Is deactivated:
–
Sends cyclic:
–
Only sends during change:
Options:
–
Yes: When the application is reloaded into the detector, the values changed via the bus are
overwritten with the parameterized values of the ETS application.
–
No: When the application is reloaded into the detector, the values changed via the bus are
not overwritten with the parameterized values of the ETS application.
Values:
■ Brightness correction
42
Description of application and parameters
Is deactivated
Sends cyclic
Only sends during change
Yes
No
Application program