Table of Contents
Advertisement
Options:
–
Yes: The internal brightness sensor is used as encoder for the different detector
applications. Applies only to this application.
–
No: The internal brightness sensor is not used. The brightness values must then be sent
from the external brightness sensors.
Options:
–
1: There is a separate external brightness 1 (input) object with which the internal brightness
sensor is not used. The brightness values must then be sent from the external brightness
sensors.
–
2: There is a separate external brightness 2 (input) object with which the internal brightness
sensor is not used. The brightness values must then be sent from the external brightness
sensors.
Options:
Options:
–
Cyclic:
–
Cyclic and during change of value:
41
Yes
No
1
2
NOTE
This parameter is only visible if the "Use of internal brightness" parameter is set
on "No".
1... 100
Cyclic
Cyclic and during change of value
Description of application and parameters
Application program
Advertisement
Table of Contents
