Table of Contents
Advertisement
Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer.
However, operation with all computers is not guaranteed. Operation with a home-built computer is also not covered by the
warranty.
Note
If the speaker goes out of BLUETOOTH pairing mode before you finish the procedure and the name of the speaker does not
appear on the BLUETOOTH device screen, repeat the procedure from step
Once the speaker is paired with the computer, there is no need to pair them again, except in the following cases:
Pairing information is deleted due to repair work, etc.
The pairing information of the speaker is deleted from the computer.
The speaker is initialized.
All pairing information will be deleted.
The passkey of the speaker is "0000." If a passkey besides "0000" is set on the computer, pairing with the speaker fails.
Related Topic
Listening to music from the connected BLUETOOTH device
Terminating the BLUETOOTH connection (After use)
5-011-977-11(2) Copyright 2020 Sony Corporation
30
.
Advertisement
Table of Contents
