Table of Contents
Advertisement
If a passkey* is required, enter "0000."
If speaker's name does not appear, perform the operation again from step
*
The passkey may be called a "passcode," "PIN code," "PIN number," or "password."
3.
When the screen for driver installation appears, click [Close].
The computer begins installing the driver.
The "
" mark will appear in the bottom left of the speaker icon during installation. When the "
disappears, driver installation is complete. Proceed to step
Register the speaker to the computer.
5
For Windows 10
After pairing, the BLUETOOTH connection establishes automatically and [Connected music] will be displayed on
the screen. Proceed to step
For Windows 8.1
1.
Right-click on the speaker's name ([SRS-RA3000] or the one you provided during the Wi-Fi network setup) in
[Devices], and then select [Sound settings] from the menu that appears.
.
27
.
.
" mark
Advertisement
Table of Contents
