Advertisement
Lumination
LRXD
®
Components
1
2
3
Alternative
2
Mounting bracket also
could be fixed on the short
side of frame
Frame Installation
1
Fixture
Ceiling Hole
Diameter
Diameter
LRXDR4
4.25–4.9 in.
LRXDR6
5.94–6.79 in.
LRXDS4
4.64–5.35 in.
LRXDS6
6.06–7.32 in.
Cut the appropriate size hole into ceiling
tile. Ensure frame hole diameter matches
fixture diameter.
3
Slide hanger bars through adjustable
mounting brackets.
2
Provided Item
1 Frame (4-inch, 6-inch)
2 Mounting brackets
3 L-Bracket
4 U-Bracket (used only with RC/LRC Series Installs)
5 Wing nut
4
5
Note: Part 4 are only for RC/LRC product, Part 5 are only for LRX product.
Option A:
If no holes are present on
the short side, use #8-1/2"
self-drilling screws.
Option B:
If the short side has holes,
please use the screws
provided with the frame.
2
Place side L-brackets on existing frame screws and
tighten with screwdriver on both sides of the frame.
Then attach mounting brackets to both L-brackets with
wing nuts (provided).
4
Bars
Option A: Mount fixture by attaching
hanger bars to T-Grid ceiling (BH3 SKU 94890).
Option B: Mount fixture with ½" EMT
conduit. Note: Supplied by 3rd party.
Installation Guide/Manuel d'installation
Fixture
LRXDR4
LRXDS4
LRXDR6
LRXDS6
Mounting brackets
L-brackets
Conduit
A
B
Qty.
1
2
2
1
3
Recommended Frame
FRAME4R
FRAME4S
FRAME6R
FRAME6S
5
Adjust height and
tighten wing nut
Adjust fixture height to be flush with ceiling
and tighten both mounting bracket wing nuts.
Advertisement
