Notes On Measurement Accuracy According To The Type Examination Certificate - ABB Terra HP User Manual

product, or unauthorized modifications, repairs or alterations to this product, or failure to strictly
comply with ABB operating and maintenance instructions.

Notes on measurement accuracy according to the type examination certificate

I. Requirements for the operator of the charging device, which he must meet as a prerequisite
for proper operation of the charging device.
The operator of the charging facility is the user of the measuring device within the meaning of Sec-
tion 31 of the Measurement and Calibration Act
1. The charging device is only considered to be used as intended and in compliance with calibration
law if the meters built into it are not exposed to environmental conditions other than those for
which their type examination certificate was issued.
2. When registering the charging points with the Federal Network Agency, the user of this product
must also register the PK specified on the charging device for the charging points in its registra-
tion form! Without this registration, it is not possible to operate the charging device in compli-
ance with calibration law.
Weblink:
https://www.bundesnetzagen-
tur.de/DE/Sachgebiete/ElektrizitaetundGas/Unternehmen_Institutionen/HandelundVertrieb/
Ladesaeulen/Anzeige_Ladepunkte_node.html
3. The user of this product must ensure that the calibration validity periods for the components in
the charging device and for the charging device itself are not exceeded.
4. The user must store the signed data packets read from the loading device - in accordance with
the pagination, permanently (also) on hardware dedicated to this purpose in his possession
("dedicated memory"), - keep them available for authorized third parties (operational obligation
of the memory.) . Permanent means that the data not only have to be stored until the business
transaction is completed, but at least until the expiry of the legal deadlines for legal redress for
the business transaction. No substitute values may be created for non-existent data for billing
purposes.
5. The user of this product must provide users of measured values who receive measured values
from this product from him and use them in business transactions with an electronic form of
operating instructions approved by the conformity assessment body. The user of this product
must in particular point out No. II "Requirements for the user of the measured values from the
charging device"
2 021 -01 -11
AB B TERR A HP US ER MA NUA L
6/ 25