Table of Contents
Advertisement
1. Introduction
1.1. Preface
This manual describes the general usage and daily operation instructions of the Terra HP charging
station. Terra HP is a modular high power DC charging system with high output current capability,
supporting both 400 VDC and 800 VDC vehicles. A single power cabinet system can deliver up to
375 A and 160 kW continuously, and 175 kW peak. With two power cabinets the system delivers up
to 500 A and 350 kW.
1.2. Intended use of this document
This document serves:
As a reference for site operators who are responsible for the charger's operation on site,
•
performing daily inspection and maintenance activities and who are able to perform simple
trouble shooting activities, after instruction of a certified ABB technician.
•
As a reference to the operator's customers, the EV drivers who will mainly use the picto-
grams and texts on the display of the charger. The user interface design was thoroughly
evaluated with user groups to optimize understandability and to get the best user experi-
ence. Besides the screens needed for the charging process, the interface has help screens
available to provide additional information.
1.3. Intended use of the charger
A Terra HP system consists of at least one power cabinet and one charge post. The outlets of the
charge post are solely used to charge electric vehicles that are compatible with the supported
charging standards.
1.4. Owner responsibilities
The owner and site operator are required:
•
To prepare the site where the charge station will be installed, according to the requirements
described in this guide.
•
To make sure that there is enough space around the charger to carry out maintenance work.
•
To make sure all protective devices are correctly installed after carrying out installation or
maintenance.
•
To operate the charge station with the protective devices installed.
•
To write an emergency plan that instructs people what to do in case of emergency.
•
To appoint a person responsible for the safe operation of the charge station and for the co-
ordination of all work. This person should be properly instructed by ABB or an ABB trained
service partner.
The owner is cautioned that changes or modifications not expressly approved by ABB could void
the owner's authority to operate the equipment or ABB's warranty. Neither ABB nor its affiliates
shall be liable to the purchaser of this product or third parties for damages, losses, costs or ex-
penses incurred by purchaser or third parties as a result of: an accident, misuse or abuse of this
2 021 -01 -11
AB B TERR A HP US ER MA NUA L
5 /2 5
Hide quick links:
Advertisement
Table of Contents
