Download Print this page
Vestil FPU-TN Series Instruction Manual

Vestil FPU-TN Series Instruction Manual

Fork tip protectors

Advertisement

Quick Links

Table of Contents
FORK TIP PROTECTORS
FPU-TN-XX and FPU-TK-XX
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Service:
To order replacement parts, labels, and accessories, contact the technical service and parts
department
online
at
replacement parts and/or service by calling (260) 665-7586 and asking for the Service Department.
Signal
Words.........................................................................................................................
Hazards................................................................................................................................
Exploded View and Bill of
Using the Fork Protectors
Record of Original
Condition.....................................................................................................
Inspections&
Maintenance.......................................................................................................
Limited
Warranty.....................................................................................................................
Table of Contents
Rev. 1/22/2019
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
INSTRUCTION MANUAL
http://www.vestilmfg.com/parts_info.htm.
Table of Contents
Materials..............................................................................................
................................................................................................................
Copyright 2018 Vestil Manufacturing Corp.
Vestil Manufacturing Corp.
Fax: (260) 665-1339
Alternatively,
FPU MANUAL
e-mail:
info@vestil.com
you
may
request
Page 1 of 4
2
2
3
3
3
3
4

Advertisement

loading

Summary of Contents for Vestil FPU-TN Series

  • Page 1 (260) 665-7586 and asking for the Service Department. Table of Contents Signal Words……………………………………………….………………………………………………………… Hazards…………………..……………………………………………………..………………………….………… Exploded View and Bill of Materials………..……………………………………………………………....Using the Fork Protectors ………………………………………..……………..........Record of Original Condition……………………………………………………………………………………….. Inspections& Maintenance…………………………………………………………………………………………. Limited Warranty…………………………………………….……………………………………………………..Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 1 of 4...
  • Page 2 DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so • and certain that it will be safe to use afterwards. DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. • Unapproved modifications automatically void the...
  • Page 3 3. Examine the protector body for thinned regions, tears, and seam separations. If you have any questions about whether a protector is fit for use, contact Technical Service for advice. Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 3 of 4...
  • Page 4 Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN. What is covered under the warranty? The warranty covers defects in the following original, dynamic parts: motors, hydraulic pumps, motor controllers, and cylinders.

This manual is also suitable for:

Fpu-tk seriesFpu-tn-45-orFpu-tk-45-orFpu-tn-45-ylFpu-tk-45-yl29-024-015 ... Show all