Subscribe to Our Youtube Channel
Related Manuals for ESPEC SH
Summary of Contents for ESPEC SH
- Page 1 Operation manual / Basic guide Bench-top type temperature (and humidity) chamber SH/SU 40093040002G0 May 10, 2019 ESPEC CORP.
- Page 2 Liability ESPEC CORP. assumes NO responsibility whatsoever for accidents or equipment trouble arising from the failure to observe handling instructions contained herein. Do not perform any operation or handle the chamber in any way or form that is not described in this guide or which is herein specifically prohibited.
-
Page 3: Table Of Contents
• SH/SU-262, 242-5 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 • SH/SU-642, 662 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 12 • Purchasing new product safety labels ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 14 ESPEC's environmental labeling "GREEN PRODUCT Label" ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 Manuals ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 Understanding the chamber model codeꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 Accessories and spare parts ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 18 Read this section before using the equipment. - Page 4 4.5 Using the measuring instrument interlock terminal ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 72 4.6 Checking the wet-bulb wick (SH only) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 73 4.7 Checking the water level of the water tank (SH only) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 74 4.8 Checking the water level of the humidifying tray during continuous operation (SH only) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ...
- Page 5 6.6 Troubleshooting ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 107 6.7 Maintenance ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 111 • Replacing a fuse ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 111 • Defrosting ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 113 Appendix Main features ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 115 • SH/SU-222, 242 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 115 • SH/SU-262 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 117 • SH/SU-642, 662 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 119 • SH/SU-242-5 ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 121 ESPEC CORP.
-
Page 6: For Restricted Use
The following keywords are used throughout this manual. Provides information necessary for gaining full performance Note from the chamber or to prevent damage to the equipment. Procedure Explains how to operate the chamber on a step-by-step basis. Reference Offers additional information. ESPEC CORP. -
Page 7: List Of Remaining Risks (Instructions For Avoiding Danger)
Failing to do so can result in injury caused by the shelves falling down. Turn off the power before removing the electrical wire from the specimen power supply terminal. ⑲ WARNING Section 4.2 Failing to do so can result in electric shock. ESPEC CORP. - Page 8 Risks and countermeasures during chamber disposal For details, see Have two people work together to remove and dispose of the door. ㉖ WARNING Section 1.4 Failing to do so can result in injury and in an individual becoming trapped in the test area. ESPEC CORP.
-
Page 9: Map Of Remaining Risks And Positions On The Product Where Safety Labels Are Affixed
Map of remaining risks and positions on the product where safety labels are affixed The numbers in the following figures are the item numbers written in the "List of remaining risks". SH/SU-222, 242 SH only ㉑ ⑤ SH only ㉑... - Page 10 100V, 200V, 220V, and 230V AC (Right side, Rear, and Top) ⑫ ㉑ ④ ㉑㉔ ㉔ ⑭⑲ ⑮㉔ ⑪ ㉓ Rear Right side ㉑㉔㉕ ⑯ Affixed to the top side of the exterior ⑯ ⑰ Remaining risks and positions on the product where safety labels are affixed (2) ESPEC CORP.
- Page 11 Bench-top type temperature (and humidity) chamber 115V AC(Right side, Rear, and Top) ㉑ ④ ⑮㉔ ㉑㉔ ㉔ ⑭⑲ ⑪ ㉓ Rear Right side ㉑㉔㉕ ⑫ ⑯ ⑰ Remaining risks and positions on the product where safety labels are affixed (3) ESPEC CORP.
-
Page 12: Sh/Su-262, 242-5
Bench-top type temperature (and humidity) chamber Basic guide Introduction SH/SU-262, 242-5 SH only ㉑ ⑤ SH only ㉑ ⑧ ⑭ ⑥⑱ ⑫ ⑬ ⑫ Left side Front ㉖ For OP viewing window ⑳ ㉑㉒ OP inner door ⑦ Remaining risks and positions on the product where safety labels are affixed (4) - Page 13 ㉑㉔ ⑫ ㉔ ⑭⑲ ⑮㉔ ㉓ ⑪ Rear Right side ㉑㉔㉕ ⑯ Affixed to the top side of the exterior ⑯ ㉑㉔㉕ SH/SU-242-5 only ⑰ Remaining risks and positions on the product where safety labels are affixed (5) ESPEC CORP.
-
Page 14: Sh/Su-642, 662
Bench-top type temperature (and humidity) chamber Basic guide Introduction SH/SU-642, 662 SH only ㉑ ⑤ SH only ㉑ ⑭ ⑥⑱ ⑧ ⑫ ⑫ ⑫ ㉖ Left side Front ⑳ For OP viewing ㉑㉒ window OP inner door ⑦ Remaining risks and positions on the product where safety labels are affixed (6) - Page 15 Bench-top type temperature (and humidity) chamber ㉑ ④ ㉑㉔ ⑫ ㉔ ⑭⑲ ⑮㉔ ㉓ ⑪ Rear Right side ㉑㉔㉕ ⑯ Affixed to the top side of the exterior ⑯ ⑰ Remaining risks and positions on the product where safety labels are affixed (7) ESPEC CORP.
-
Page 16: Purchasing New Product Safety Labels
Basic guide Introduction Purchasing new product safety labels If a product safety label becomes damaged, lost, or the warning display is no longer legible, contact your distributor or ESPEC. A replacement product safety label will be shipped for a fee. ESPEC CORP. -
Page 17: Espec's Environmental Labeling "Green Product Label
Bench-top type temperature (and humidity) chamber ESPEC's environmental labeling "GREEN PRODUCT Label" ESPEC has been striving for the development of eco-friendly products by establishing an environmentally conscious design and development guidelines for the prevention of global warming and pollution and the promotion of resource recycling. -
Page 18: Manuals
Network guide perform operations. • PC communication function (LAN) Describes how to operate the optional equipment and Option functions. Circuit diagram Electric circuit diagram, parts list, option drawings ESPEC CORP. -
Page 19: Understanding The Chamber Model Code
U: Low temperature 6：64L chamber － 2 2 – 5 Temperature change rate: 5℃/min Set temperature 4：-40C Capacity 2： 22.5L H: Humidity chamber U: Low temperature chamber Temperature-Humidity control range (SH only) Standard temperature and humidity range Temperature [C] ESPEC CORP. -
Page 20: Accessories And Spare Parts
Bench-top type temperature (and humidity) chamber Basic guide Introduction Accessories and spare parts ①Shelf ② Cable port rubber ③ Humidifying tray plug drain hose (SH/SU-222, 242, (SH/SU-642, 662) 262,242-5) ⑥Terminal plug ⑦ Power plug ④ Water tank level ⑤Connector (For external interface) - Page 21 Use to connect the chamber to the external Terminal plug ⑥ (For external devices. interface) (SH/SU-222,242, 115V AC only) Use to connect socket for 20A. (SH/SU- ⑦ Power plug 262,100V AC only) Box of 24 wet-bulb wicks and 1 dropper ⑧ Wet-bulb wick (SH only) SH/SU-222, 242...
- Page 22 Bench-top type temperature (and humidity) chamber Basic guide Introduction ESPEC CORP.
Need help?
Do you have a question about the SH and is the answer not in the manual?
Questions and answers