Fein BLK 1.3 CS Manual page 8

FRT:
BLK 1.3 CS / BLK 1.3 T
2.4. Maintenance and service intervals
After approx. 300 operating hours:
• Disassemble the machine and clean it; use compressed air
or a brush to clean the insulating components
Depending on type and duration of usage, but every 6 months at the latest:
• Disassemble machine
• Thoroughly clean machine
• Wash out the gears using detergent and regrease them
• Replace the bearings
• Check cables and inner strands for abrasions
• Check for good fit of plugs and sockets
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN.
Sahre / MVK - 04 / 07