Roof Assembly - P.Lindberg 9062241 Original Assembly Instructions

Roof assembly

STEP 7: Install polyester roof cover on top of roof support arms so that it is evenly
positioned.
Secure each corner with the elastic straps by pulling down under the roof support
arm as shown in fig. 7
Next, complete the roof cover assembly by installing four bungee cords (6) (one on
each side). Insert the bungee cord through the grommet and stretch around frame.
Pull through the adjacent grommet and stretch over the attached ball as in fig. 8.
STEP 8: For added security, it is recommended that you install the ground stakes over
the bottom rail as shown in fig.9
You are now ready to use the FOLDABLE KENNEL
6
MAN 9062241 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tlf: 70212626 DK-6600 Vejen e-mail: salg@p-lindberg.dk