Download Print this page

Hotpoint BI WDHG 7148 Operating Instructions Manual page 5

Advertisement

washing machine will switch off automatically after about half an hour. Open the door and unload the washing
machine. Leave the door ajar to allow the drum to dry.
Options
!If the selected option is incompatible with the programme set, the incompatibility will be signalled by a buzzer and
the corresponding indicator light will flash.
!If the selected option is incompatible with another previously set option, only the most recent selection will remain
active.
Energy saving
This option saves energy by not heating the water used to wash your laundry – intensified wash action and water
optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results,
we recommend the usage of a liquid detergent.
Start delay
To set the selected programme to start at a later time, press the button to set the desired delay time. The
symbol lights on the display when this function is enabled. To cancel the delayed start, press the button again until
the value "0" is shown on the display.
Temperature
Each wash cycle has a pre-defined temperature. To modify the temperature, press the "Temp" button. The value will
appear on the display.
Spin
Each wash cycle has a pre-defined spin speed. To modify the spin speed, press the "Spin Speed" button. The value
will appear on the display.
Setting the drying cycle
The first time the button "Drying Settings" is pressed, the machine will automatically select the maximum drying
cycle which is compatible with the selected wash cycle. Subsequent presses will decrease the drying level and then
the drying time, until the cycle is excluded completely "OFF". Drying may be set as follows:
A- Based on the desired laundry dryness level:
Cupboard: suitable for laundry which can be put back in a cupboard without being ironed.
Hanger: Ideal for clothes which do not need to be dried fully.

Advertisement

loading