Table of Contents
Advertisement
Quick Links
Hotpoint recommends, for your own safety and to ensure you get the best possible results from your Washer
Dryer, you read through this booklet and follow these steps thoroughly.
STEP 1
Electrical Guide
Choose a location for your washer dryer,
where possible on a solid floor, with the
electrical sockets and water supply taps
Allow sufficient space: 600mm width,
600m depth and 900mm height.
DO NOT install in a bath or shower
WARNING: This appliance must be earthed.
STEP 3
Dispenser Drawer
Read through this section to familiarise
yourself with the different
compartments within the dispenser
Hotpoint recommend the Persil range of
NOTE: Always follow manufacturer's dosage
STEP 5
Options Guide
All available optional wash features are
explained within this section - These
allow you to adjust your selected wash
programme to suit your needs.
NOTE: In addition to the temperature of the
incoming water, the selection of optional wash
features will affect the programme times.
STEP 7
Wash & Auto Dry Programme
A picture guide provides a clear
explanation how to set a wash and auto
DO NOT overload the washer dryer.
NOTE: Hotpoint recommend, on completion of
your programme, that you switch off both the
electricity and water supply to the appliance.
Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.
INSTRUCTIONS FOR INSTALLATION & USE
easily accessible.
room.
drawer.
detergent products.
recommendations.
dry programme.
Keep these instructions in a safe place for quick reference.
WD52
STEP 2
Installation Guide
Dispose of packaging material in a safe
place and remove any labels.
Please read through thoroughly to
ensure you understand each stage
before you begin.
Remember you may be charged for a service call if a
problem with your washer dryer is caused by
incorrect installation or misuse.
STEP 4
Wash Guide
A wash chart is provided to help you to
select your required programme.
Examples given for the maximum
washing load weight for different fabric
types.
STEP 6
Drying Guide
A guide to drying times is provided for
independent drying programmes, along
with a list of items not suitable for
tumble drying.
Examples given for the maximum drying
load weight for different fabric types.
NOTE: Always make sure the mains button is in the
OFF position before selecting an independent
drying programme.
STEP 8
Troubleshooting
Please refer to the Troubleshooting
section if you have any problems when
using your washer dryer.
READ BEFORE
There may be nothing wrong!
CONTACTING
SERVICE!
Advertisement
Table of Contents
Related Manuals for Hotpoint WD52
Summary of Contents for Hotpoint WD52
- Page 1 INSTRUCTIONS FOR INSTALLATION & USE Hotpoint recommends, for your own safety and to ensure you get the best possible results from your Washer Dryer, you read through this booklet and follow these steps thoroughly. STEP 1 Electrical Guide Choose a location for your washer dryer,...
- Page 2 WARNING: Do not use plug unless fuse holder is in locked position. Changing the Mains Lead A special lead can be ordered from Hotpoint Service UK: 08709 066 066 or Republic of Ireland: 1850 302 200 If you have damaged the existing lead or require a longer one a charge will be made.
-
Page 3: Remove Transit Brackets
Standpipe height: minimum 500mm from the floor. CONNECT TO THE POWER SUPPLY... NOTE: Hotpoint recommend extension leads are not used. Move your machine into position, take care not to trap or kink the hoses. PLEASE USE THE NEW HOSES SUPPLIED, FITTED TO THE MACHINE. -
Page 4: The Dispenser Drawer
A cold fill adaptor is available from your local Connect fill hoses to Hotpoint authorised Service water supply taps: Centre or by calling the - Red or Grey Hose Genuine end to Hot Parts &... -
Page 5: Choosing Washing Programme
STEP 4 IMPORTANT INFORMATION: The temperature of the incoming water supply and selection of any Optional Wash Feature, ie. Economy Wash, will affect the programme times. ITCL Codes Fabric Heavy soiled loads. On completion, switch ‘OFF’ Prewash mains button before selecting 40 wash programme. -
Page 6: Automatic Features
STEP 5 Button Selection: To select, press button. Press again to cancel. Economy Wash Save money and time on lightly soiled loads. Lightly soiled clothes are washed at the temperature of the incoming household water supply. Programme ‘A’ is heated to a reduced temperature of 30˚C. Not available with programme ‘H’... - Page 7 STEP 6 Fabric Items Not Suitable Type for Tumble Drying: Garments with the ITCL Natural code - DO NOT TUMBLE DRY. Woollens. Synthetic Large bulky items eg. quilts, bedspreads, pillows etc... expand when dry, preventing air IMPORTANT INFORMATION: A 10 minute ‘Cool Tumble’ phase at the end of flow through the each drying cycle allows fabrics to gently cool down, minimising creasing.
- Page 8 STEP 7 Sort laundry by label Close door by into groups with the applying pressure at same wash & dry the 2 o’clock position. requirements, load the appliance. See Drying Weight Load examples (STEP 6). Turn the drying dial to select a suitable drying time and temperature for fabric type (see...
-
Page 9: Washcare Tips
STEP 8 Washcare Tips: Before washing: Pre-treat stains. Close zips, tie belts, strings etc... and press studs to prevent tangling. Remove papers or tissues from pockets. Remove sharp objects and coins from pockets as they could cause damage to clothes or the appliance. - Page 10 MY MACHINE IS LEAKING Are the fill hoses on correctly? If not tighten them. standpipe tions free Is your water pressure too high? Turn the main supply tap down. Is the standpipe or household drain blocked. You may need to call in a plumber.
-
Page 11: Cleaning The Exterior
Optional Wash Feature Buttons Dispenser Drawer Adjustable Feet RED line indicates the minimum height for the drainage hose. Hot Water inlet point and supplied Hose (Red or Grey end) Cold Water inlet point and supplied Hose (Blue end) Mains Cable Drainage Hose Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and Repair Service and Information Desk... -
Page 12: After Sales Service
Republic of Ireland: 1850 502 200 Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover plans to give you total peace of mind. Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during the period of cover.