Page 1
INDIAN FORTRESS BED ASSEMBLY INSTRUCTIONS Professional Installation Required NUMBER OF PERSONS TO ASSEMBLE - 3 TO 4 APPROX TIME TO ASSEMBLE: 15 TO 25 MINUTES COMPONENTS (2) WOODEN CLEAT X 1PC (1) HEADBOARD X 2PC (3) FOOT BOARD X 1 PC...
Page 2
STEP - 1 Measure the mounting height on the wall by measuring the height of the hardware fitted at the back of the headboard such that the headboard rests on the floor. STEP - 2 Fix the wooden cleat (2) on the wall using screw (8) into wall studs. If wall has baseboard molding then remove wooden bar from bottom corners...
Page 3
STEP - 4 For stabilizing both parts of headboard (A) and (B), put Bolt (9) into the slot provided at bottom of headboard to fix it with flat Washer (10), Screw Nut (11) and Wrench (12). STEP - 5 Tighten Bolt (13) by hand in Headboard (1) and Footboard (3) to attach side rails. Page 3 of 5...
Page 4
STEP - 6 Attach the side rails (4) to the headboard (1) and footboard (3) to the headboard bolt with the flat washers (11), screw nuts (14) and wrench (15) on all four corners of bed as shown in the picture. STEP - 7 Fix the Center Support (5) in the Headboard (1) and Footboard (3) Slots as shown in the picture.
Page 5
STEP - 8 Fix the slat support (6) on the Center support (5) and Side rails (4) as shown in picture. STEP - 9 Assembly completed. Page 5 of 5...
Need help?
Do you have a question about the INDIAN FORTRESS BED and is the answer not in the manual?
Questions and answers