Axis 5400+ User Manual page 39

LaserWriter 8.0
Printer Driver
Bi-directional
Support
Verifying the Setup
AXIS 5400+ / AXIS 5600+ User's Manual
4. Click the name of the printer you want — the ports are shown as <host
name>_<port>. Example Example Example Example: AXIS100086_LPT1.
5. Click the Close Close box. This completes the configuration and closes the Close Close
Chooser.
Repeat this procedure for each Macintosh computer on the network using
the print server.
Follow the instructions below to choose a printer:
1. Select Chooser Chooser Chooser Chooser from the Apple
2. Click the LaserWriter 8.0 LaserWriter 8.0 icon. LaserWriter 8.0 LaserWriter 8.0
3. If your network has more than one zone click on the zone you want. (If your
network does not have any zones, this box will not appear.)
4. Click the name of the printer you want — the ports are shown as <host
name>_<port>. Example Example Example Example: AXIS100086_LPT1.
5. Click Setup... Setup... Setup... and then Auto Setup Setup...
directional printing and the appropriate PPD file is available, the installation
is performed automatically and you can therefore proceed directly to step
7 (if this is not the case, the PPD file must be selected manually, as described
in step 6).
6. Choose the PPD file matching your printer, and click OK
If your printer does not appear in the PPD file list, please contact your printer
vendor. Use the Generic PPD if you do not need any printer specific features.
7. Click OK OK, and then click the Close
OK OK
closes the Chooser.
Repeat this procedure for each Macintosh computer on the network using
the print server.
The AXIS 5400+/AXIS 5600+ allows the printer driver to communicate
directly with the printer and consequently facilitates complete functional
control over print jobs, e.g. automatic downloading of fonts not resident
in the printer.
This functionality has backward compatibility with older printers and
Macintosh computers, which means that the AXIS 5400+/AXIS 5600+
can generate appropriate responses to Macintosh printer queries when the
connected printer does not support bi-directional communication.
You simply need to print a document from the Macintosh computer to
verify communication to the chosen printer. The basic installation can be
considered complete if the print test is satisfactory. The AXIS
5400+/AXIS 5600+ is now ready for use.
Adding Printers in Macintosh
Apple menu. Apple Apple
Auto Setup. If the selected printer supports bi- Auto Setup Auto Setup
Close box. This completes the configuration and
Close Close
OK.
OK OK
39