Quick Start; Setting The Temperature; Setting The Grill Level; Preheat Phase - Whirlpool AKZ 6240 IX User And Maintenance Manual

USING THE OVEN

3 QUICK START

To skip the mode-setting wizard and to quickly
launch a cooking cycle.
Rapidly start any function.
The oven will run the cooking cycle using the
default temperature, and the display will count
upwards to indicate time progress.
Immediately start the cooking cycle using the
most recent values set.

4 SETTING THE TEMPERATURE

To adjust the temperature for all cooking cycles
provided, except Grill
Warm and Rising
Confirm desired function.
C°/F° icon flashes.
Set desired temperature.
Confirm and go to set duration (section 5) or
Quick start.
, Turbo Grill , Keep
.

4.1 SETTING THE GRILL LEVEL

To set the power level for Grill
cooking functions.
There are 3 defined power levels for grilling:
-1- (low), -2- (mid), -3- (high).
The right display shows the default value between
two flashing "- -".
Set desired level.
Confirm and go to set duration (section 5) or
Quick start.

4.2 PREHEAT PHASE

For the provided cooking functions (Conventional
, Forced Air , Convection Bake
Preheating ) there is a compulsory preheat phase
which starts automatically and enables the desired
temperature to be reached quickly.
An arrow flashing in loop beside the target
temperature indicates the preheat phase.
When the oven reaches the target temperature, a
buzzer sounds.
Put the food in the cavity and close the door: the
oven automatically starts the chosen cooking
cycle.
NOTE: Anyway, or
function.
Putting food into the cavity before the end of the
preheat phase may compromise the cooking
performance.
EN 13
and Turbo Grill
, Fast
to start the cooking