Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally - friendly manner. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268.
Page 11
Replace any worn or damaged parts immediately. • Regularly examine the power cord, if damage is found, power cord must be replaced by a qualified person using the correct Numatic original part. • Keep diffuser filter (where fitted) clean. Don’t •...
Fault Finding Dry Mode maintenance/fault finding If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies. If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall, inspect the floor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the dust bag is not full the filter may be blocked.
Need help?
Do you have a question about the CVC 370 and is the answer not in the manual?
Questions and answers