Axis Ip Utility - Axis 231D+ Installation Manual

Page 8

AXIS IP Utility

AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address. AXIS IP Utility is available on
the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS 231D+/232D+ on the same network segment (physical
subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS 231D+/232D+ is
connected to the network and that
power has been applied.
2. Start AXIS IP Utility.
When the AXIS 231D+/232D+
appears in the window, double-click
it to open the camera's home page.
3. See Setting the Password, on page 13
for further instructions.
Set the IP address manually
1. Acquire an unused IP address on the
same network segment your
computer is connected to.
2. Click the button
and IP address for the AXIS 231D+/232D+. The serial number is located on the product
label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page to access the AXIS 231D+/232D+ web pages.
5. See Setting the Password, on page 13 for further instructions.
Notes:
Set the IP address using IP Utility within 2 minutes of starting
the camera.
AXIS IP Utility can be used to change a dynamically set
IP address to a static one.
Set IP address using serial number and enter the serial number
AXIS 231D+/232D+ Installation Guide
Single camera / small installations