Advertisement
Quick Links
Models/Modelos/Modéles
T67385- LHP & T67485- LHP
Series/Series/Seria
Charlotte™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
Note: Handle Kits must be ordered separately. / Nota: los juegos de manijas se venden por separado. /
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de
válvulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
Specify Finish/Especifíque el Acabado/Précisez le Fini
TWO HANDLE ROMAN TUB TRIM
86654
LLAVE Y SUS ACCESORIOS PARA BAÑERA
ROMANA DE DOS MANIJAS (MANERALES)
ACCESSOIRES DE FINITION DE ROBINET
À DEUX POIGNÉES POUR BAIN ROMAIN
Note : Manettes en kit vendues séparément.
®
?
®
"The Commonwealth of Massachusetts requires all hand-held shower sprays to comply with the Massa-
chusetts State Plumbing Code 248 CMR whereby their installation shall include a device that limits the
maximum deliverable temperature of hot water to 110°F and an approved prevention system ."
"La Commonwealth de Massachusetts requiere todos los aerosoles de mano de la ducha conformarse
con el código 248 CMR de la plomería del estado de Massachusetts por el que su instalación incluya
un dispositivo que limite la temperatura entregable máxima de la agua caliente a 110°F y a un sistema
aprobado de la prevención de la expulsión."
« Le Commonwealth du Massachusetts exige de tous les pulvérisateurs tenus dans la main de douche
d'être conformes au code 248 CMR de tuyauterie d'état du Massachusetts par lequel leur installation
inclue un dispositif qui limite la température livrable maximum de l'eau chaude à 110°F et à un système
approuvé d'empêchement de refoulement. »
86654
1
T67385- LHP
T67485- LHP
1/8" (3.17mm)
8/25/14 Rev. A
Advertisement
Related Manuals for Brizo Charlotte T67385 LHP Series
Summary of Contents for Brizo Charlotte T67385 LHP Series
- Page 1 Note: Handle Kits must be ordered separately. / Nota: los juegos de manijas se venden por separado. / Note : Manettes en kit vendues séparément. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 1/8" (3.17mm) For easy installation of your Brizo ® faucet you will need: 1/8" (3.17mm) •...
- Page 2 This warranty excludes all industrial, commercial & business usage, whose purchasers are vice. Replacement parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and hereby extended a five year limited warranty from the date of purchase, with all other terms Canada) or by writing to: of this warranty applying except the duration of the warranty.
- Page 3 Model / Modelo / Modèle T67485 Model / Modelo / Modèle T67385 RP70608 Lift Rod Assembly Ensamble de la barrita RP70604 de alzar Allen Wrench, Set Screw & Button Tirette Llave Allen, Tornillo de Presión y RP70604 Botone Allen Wrench, Set Screw & Button Clé...
-
Page 4: Maintenance
RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance Model T67485 If faucet leaks from spout outlet–Shut off water supplies– If faucet does not divert water from the spout to the hand shower, Replace Seats and Springs (1). * check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. - Page 5 T67385 T67385 T67485 3/32" (2.38 mm) 3/32 po Note: The deck and valve rough-in must be finished before Model T67385 installing the trim kit. Install spout onto adapter (1). Note: Use silicone under spout if deck is uneven. Be sure spout is resting firmly on deck. Install set screw (2) and tighten to secure spout. Model T67385 Push button cover (3) into spout set screw hole.
- Page 6 T67485 T67485 T67485 T67485 T67485 For Model T67485 Only Model T67485 Carefully align the spout over the center mounting shank with diverter (1) and push Remove and discard the test cap and gasket (1). Note: This is an extra spout down firmly on the deck. Note: if mounting surface is uneven, silicone gasket, one is supplied with the hose.
- Page 7 Note: Handle kits (HL685) are sold separately. Make sure valve is in the off If handles do not align to the desired position or direction, unscrew one or position. Push the handle adapter with plastic insert (1) over the valve stem (2), both of the handle and base assemblies and try assembling again after making sure to align the “D”...
- Page 8 Fermez ensuite le robinet de baignoire en utilisant essayer de vaincre la pression de l’eau. Vérifiez l’étanchéité de tous les raccords ses manettes. Retournez la tirette en position normale. et serrez-les de nouveau au besoin. www.brizo.com 86654 Rev. A...