Table of Contents
Advertisement
mark 1 points to a higher read-
5
ing on the scale.
To reduce damping: Use the
84
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 1 points to a lower read-
ing on the scale.
Rebound stage, basic
setting, rear
Position 1 (comfortable setting
with rider 85 kg)
Position 4 (normal setting with
rider 85 kg)
z
Position 7 (sports setting with
rider 85 kg)
Factory default settings,
front wheel
Reset the factory defaults as
stated below.
Factory default settings
for compression/rebound
stages, front
Position 3
Factory default settings,
rear wheel
Reset the factory defaults as
stated below.
Factory default setting
for rebound stage, rear
Position 4
Viewing suspension
damping with DDC
with Dynamic Damping Control
OE
(DDC)
Switching on ignition (
Press button 1 briefly to view
the current setting.
40).
Damping is shown in area 1 and
load in area 2 of the multifunc-
tion display.
Advertisement
Table of Contents
