Table of Contents
Advertisement
Raise the front wheel, insert
quick-release axle 1 and
tighten to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamping
screws 2 to the specified tight-
ening torque.
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Remove the rear-wheel stand
and the front wheel stand.
Ease the brake calipers on to
the brake discs.
Hold left brake caliper 1 in
place and position cable
guide 2.
Install screws 3 and tighten to
the specified tightening torque.
Radial brake caliper to
axle mount
38 Nm
Secure the cable for the wheel-
speed sensor in the holder ar-
row.
9
143
z
Advertisement
Table of Contents
