Table of Contents
Advertisement
Disconnect plug 1.
Release spring clip 1 at left
and right and swing it up.
Remove bulb 2 from the
socket.
Replace the defective bulb.
NOTICE
Bulbs with higher light-intensity
ratings are available through af-
termarket suppliers. These bulbs
burn out more rapidly and gener-
ate more heat than conventional
bulbs. Under adverse conditions
the extra heat can cause damage
to the headlight.
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
Hold the bulb by the base only,
in order to keep the glass free
of foreign matter.
Install bulb 1. Begin by seating
lug 2 and then press the bulb
into the socket.
Engage spring clip 3 in the
catch on left and right.
Connect plug 1.
9
149
z
Advertisement
Table of Contents
