Brake System With Bmw Motorrad; Bmw Motorrad Integral; Abs; Integral Abs - BMW R 1200GS Adventure 2015 Rider's Manual

During deceleration and down-
6
shifts (throttle plate closed) the
system blips the throttle to ob-
104
tain the correct engine speed.
Shifting times are faster than
when the clutch is used to
change gears.
For the system to detect the rid-
er's intention to change gear,
the previously stationary gear
lever must be moved in the de-
sired direction against the force
of the spring and with a certain
amount of "overtravel" at a stan-
dard to rapid travel speed, and
then maintained in this posi-
tion until execution of the shift
z
is completed. No additional in-
crease in shifting force is nec-
essary during the gear shifting
process. After the gear change
is completed, the gear lever must
be fully released before the Pro
Gear Shift Assistant can exe-
cute a new gear change. The
load factor (throttle grip position)
should remain constant both prior
to and during execution of shifts
using the Pro Gear Shift Assis-
tant. Changing the position of
the throttle grip while the shift
is in progress can lead to can-
cellation of the function and/or
shifting errors. No support is
provided by the Pro Gear Shift
Assistant during gear changes
made using the clutch.
Downshifts
Downshifts are assisted up to
the speed at which the engine
reaches maximum rpm in the
gear to be engaged. Over-
revving is thus prevented.
Maximum engine speed
-1
max 9000 min
Upshifts
The Pro Gear Shift Assistant
does not provide added sup-
port when the engine speed
would fall below idle in the new
gear.
Idle speed
-1
1150 min (Engine at operat-
ing temperature)
Brake system with

BMW Motorrad Integral

ABS

Partially integral brake
Your motorcycle is equipped with
a partially integral brake configu-
ration. Both front and rear brakes
are applied simultaneously when
you pull the handbrake lever.
The footbrake lever acts only on
the rear brake.