Melec ADB-2640U Instruction Manual page 8

●When installing:
●When connecting the DC Input/Motor Output Connectors (J2, J3):
●When inputting power:
●When inputting the motor excitation stop (M.F) signal:
WARNING
Overheating may cause fire.
Mount it on a noncombustible member.
Keep it away from combustibles.
CAUTION
Erroneous connection may cause
breakage of the motor or the driver.
Correctly connect the DC Input/Motor
output connector.
CAUTION
Breakage of the machine or injury is
apprehended due to unexpected behavior of
the motor. Maintain the state where
emergency stop is enabled at any time.
CAUTION
Deterioration of the holding power with
the motor may cause breakage of the machine
or injury.
Check safety before inputting.
-8-
ADB-2640U
Instructions Manual