Axiom Architectural W2 Owner's Manual

The Axiom Warranty
All our speaker models; towers, bookshelves, surrounds, centers, subwoofers and
all our amplifiers; subwoofer and multichannel amplifiers are warrantied against
manufacturer's defects for 5 years.
AXIOM CANADA INC. warrants this audio loudspeaker system (the "Product")
to be free from original manufacturing defects in materials and workmanship for
five years from date of purchase from an authorized Axiom dealer. This warranty
extends only to the original consumer purchaser. AXIOM CANADA INC. does
not warrant goods used in commercial or industrial applications. This warranty
does not cover any expenses incurred in any removal or re-installation of the
product.
If the product should prove so defective within the warranty period, return the
product by prepaid delivery to AXIOM CANADA INC., along with the original
sales invoice or other proof of purchase, which establishes eligibility for warranty
service. AXIOM CANADA INC. will, at its option, replace or repair the product
free of charge and return the product by prepaid delivery. This warranty does not
apply to any product, which has been damaged, misused, altered or repaired by
anyone other than an AXIOM CANADA INC. authorized service facility.
Any implied warranties including fitness for use and merchantability are limited
in duration to the period of the express warranties set forth above, and no person
is authorized to assume for Axiom Canada Inc. any other liability in connection
with the sale of the product. Axiom Canada Inc. expressly disclaims liability for
any incidental and consequential damages caused by the product. The remedies
provided under this warranty are exclusive and in lieu of all others.
This warranty gives specific legal rights. In addition, there may be other legal
rights arising from the sale of the product, which vary from province to province
or state to state. Some provinces / states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may
not apply in some areas.
Step-by-step instructions on configuring your in-wall/on-wall speakers.
Instructions, étape par étape, pour la mise en fonction de vos enceintes "encastrées - en surface"
Location: / Positionnement:
This is by far the most important step before we even begin the installation.
For the most effective placement the speakers should be at roughly the same
height as the middle of the TV screen they are to be used with, one to the left
and one to the right of the screen. Otherwise, a height of five or six feet from
the floor and in between the studs of the wall is ideal. Avoid corner locations if
possible. Separate the left and right speakers by about 5 to 10 feet, or roughly
half the listening distance. Please make sure the speaker wire has a clear path
from your stereo or A/V receiver to the placement of your speaker.
The Axiom Architectural Speakers are designed to be installed in the common
stud wall with drywall or some similar type wall board covering. For other
types of walls special installation procedures will need to be used.
+++
Ceci est de loin l' é tape la plus importante avant même le début de l'installation.
Pour un positionnement optimal, les haut-parleurs devraient être localisés, l'un
à droite et l' a utre à gauche, à mi-hauteur de l' é cran de télé avec lequel ils seront
associés. Alternativement, la hauteur idéale serait d' e nviron cinq à six pieds
Product Links:
au-dessus du plancher et entre les colombages. Si c' e st possible, évitez les coins.
http://axiomaudio.com/wallspeakerw2_main.html
Séparez les haut-parleurs gauche et droit d'une distance d' e nviron cinq à dix
http://axiomaudio.com/wallspeakerw3_main.html
pieds ou de la moitié de la distance d' é coute. Veuillez vous assurer qu'il n'y ait pas
d' o bstacle qui obstrue le passage des fils de haut-parleurs jusqu' à votre récepteur
stéréophonique ou Audio/Vidéo.
Les haut-parleurs Architecture d' A xiom sont conçus pour être installés sur un
mur avec colombage et gypse communs ou sur une surface de même type. Pour
d' a utres types, il faudra recourir à une procédure spéciale.
Model:
Max Rec. Amp Power: 150 Watts
Min Amp Power: 15 Watts
Response +/- 3dB: 70 Hz – 22 kHz
Response + 3dB/- 9dB: 60 Hz – 22 kHz
Impedance: 8 Ohms
SPL In Room 1w/1m: 90 dB
SPL Anechoic 1w/1m: 86 dB
X-Over: 2.7 kHz
Tweeter: Single 1"
Woofer: Single 5¼"
On-wall Dimensions HWD mm: 293 x 211 x 91
In-wall Dimensions HWD mm: 200 x 79 x 86
On-wall Dimensions HWD inches: 11.5 x 8.3 x 3.6
In-wall Dimensions HWD inches: 7.86 x 3.1 x 3.4
Weight kg each: 3.83 kg
Weight lbs each: 8.45 lbs
W2 & W3 Architectural Series
Owners Manual
W2 W3
175 Watts Puissance maximale admissible :
10 Watts Puissance minimale :
60 Hz – 22 kHz Réponse en freq. +/- 3dB :
50 Hz – 22 kHz Réponse en freq. + 3dB/- 9dB :
8 Ohms
91 dB Sensibilité en salle 1w/1m :
87 dB Sensibilité Anéchoïque 1w/1m :
2.2 kHz
Single 1" Transducteur d'aigu :
Single 6½" Transducteur de grave :
345 x 244 x 91 Dimensions en saillie HLP mm :
244 x 106 x 86 Dimensions encastrées HLP mm:
13.6 x 9.6 x 3.6 Dimensions en saillie HLP inches :
9.6 x 4.18 x 3.4 Dimensions encastrées HLP :
4.08 kg Poids en Kilo chacun :
9 lbs Poids en lb chacun :
Modèle :
Impédance :
Filtre :