Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode. This is indicated
by the lights flashing rapidly.
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by long pressing the power button on the controller for 5-10 seconds until the
lights start blinking rapidly.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Lighting > Outdoor
Garden Light).
7.
Ensure that the device is in pairing mode, with the lights flashing rapidly, and tap
"Confirm light is rapidly flashing".
Advertisement
Table of Contents
