SAFETY & WARNINGS • Ensure to read instructions in this user guide to install the spotlights. Store the user guide for future use. • Switch off the main power supply before installation. • These spotlights must be installed by experienced professionals. •...
Page 4
COMPONENTS Spotlights (x3) Pins with Screw Head (x3) Hexagon Wrench (x1) Wires (x2) Controller (x1) User Guide...
INSTALLATION Fixing the Spotlights on the Ground Step 1: • Remove the screw from the pin. • Place the spotlight on the pin head, adjust the spotlight angle using the wrench. • Replace the screw and tighten it to fix the spotlight firmly. Step 2: •...
Page 6
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
Page 7
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode. This is indicated by the lights flashing rapidly. If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by turning off and turning on the spotlights for 3 times until the lights starts flashing rapidly.
Page 8
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
OPERATION After entering the device’s control page, tap the switch icon to switch on the spotlight. Lights On Lights Off...
Page 10
Control Page Options When the light is switched on, the following options are displayed on the control page: Colour Choose the spotlight colour. Edit the brightness and saturation. Scene Select a scene and reset by tapping the Edit icon. Music Select music, the spotlight colour changes depending on the music played.
DEVICE SETTINGS Device Settings Tap the pencil icon located at the top right corner of the control page, to see more information about the device. Device’s virtual ID, IP address, MAC address, Time Zone Device information and Signal Strength. Tap-to-Run and Automation Set up scenes and run those automatically Offline Notification Receive the notification even when the device is offline.
Page 12
” icon to access the ‘Add and manage’ page. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
Page 13
Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
Page 14
Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
Page 15
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &...
Page 16
SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality,...
Page 20
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...