Hardware Installation - Edge-Core EWS5204 Quick Installation Manual

Hardware Installation

Please follow the steps below to install the EWS5204:
1. Attach the power cord to the power supply socket on the rear panel. The power LED should be on
indicating a proper connection.
2. Connect a switch/router of an internal network to the WAN1 Port on the front panel via an Ethernet cable.
The WAN1 LED should be on indicating a proper connection.
3. Connect an administrative PC to any LAN Port on the front panel via an Ethernet cable. The LED of this
LAN port should be on indicating a proper connection.
④
Quick Installation Guide
EWS5204 ENGLISH