Edge-Core EWS5204 Quick Installation Manual page 12

Wireless lan controller
Table of Contents

Advertisement

< User Login >
Follow the steps below to verify the basic
configurations completed through Setup Wizard:
1. Connect a laptop PC to any LAN Port of the
EWS5204. The PC will obtain an IP address
automatically from the EWS5204.
2. Launch a web browser and enter any website
URL. The default User Login Page will appear.
3. Enter the Username and Password of a local
user account previously created via Setup
Wizard (e.g. Username: testuser and Password:
testuser); then Click Login.
Note:
1.
EWS5204 supports multiple authentication
server options including built-in local user
database and external authentication servers.
2.
The complete username format is
userid@postfix, where the "postfix" string
stands for the back-end authentication server.
Therefore, match-up between username and
back-end authentication server is based on
the "postfix" string in the complete username.
3.
Normally, users have to enter the complete
username (e.g. testuser@local) during login.
However, the postfix can be omitted when the
postfix matches the default authentication
server option. For example, LOCAL database
is enabled as the default authentication
option; therefore, in this case, you can simply
enter testuser as the username to log in.
The Login Success Page appears after the user is
successfully authenticated by the system.
Well Done! The EWS5204 is now up and running
with the basic configurations.
Quick Installation Guide
EWS5204 ENGLISH
P/N: V10020180222

Advertisement

Table of Contents
loading

Table of Contents