Table of Contents
Advertisement
System Overview
Front Panel
1.
LCD Panel: This panel allows administrators to view system information such as network interfaces
through the navigation buttons (ESC, UP, DOWN, and ENTER).
2.
LED Indicators:
Power: Lights up when power supply is on.
HDD: Hard drive activity light.
3.
Restart: To restart the system, press and hold the button for 5 seconds and release the button.
4.
Console: Ports (USB Type-C and RJ45) for connection to the Console Interface of the controller. Use a
terminal emulation program such as Microsoft's Hyper Terminal to access the configuration console.
5.
USB 3.0: USB ports reserved for future use.
6.
RJ45 Ports:
WAN1, WAN2: RJ45 ports (10/100/1000 Base-T) for the uplink Ethernet connection. It is the default
port that can pass all traffic to an uplink device, such as the xDSL modem / router.
LAN1 – LAN6: RJ45 ports (10/100/1000 Base-T) for the downlink Ethernet connection. Downlink
devices such as switches, APs, and client PCs can be attached here.
7.
SFP Ports: Ports to insert Small Form-factor Pluggable (SFP) transceiver modules
WAN1, WAN2: For the uplink connection via a fiber optic cable.
LAN1, LAN2: For the downlink connection via a fiber optic cable.
②
Quick Installation Guide
EWS5204 ENGLISH
Advertisement
Table of Contents
