Table of Contents
Advertisement
General Information
AAON WH Series Water-Source Heat
Pump units (WSHP) are designed for indoor
installation only. Units are assembled,
wired, charged and run-tested at the factory.
WARNING
Improper
installation,
alteration, service or maintenance
can
cause
personal injury or loss of life. Startup
and service must be performed by a
Factory Trained Service Technician.
A copy of this IOM must be kept with
the unit.
CAUTION
These units must not be used as a
"construction
heater"
during any phase of construction.
Very low return air temperatures,
harmful vapors, and misplacement of
the filters can damage the unit and its
efficiency.
Certification of Cooling Models
a. Certified as a commercial central air
conditioner with electrically operated
compressors.
b. Certified for indoor installation only.
c. Certified with refrigerant R-410A coils.
12
adjustment,
property
damage,
at
anytime
Codes and Ordinances
WSHP Series units have been tested and
certified, by ETL, in accordance with UL
Safety Standard 1995/CSA C22.2 No. 236.
System must be sized in accordance with the
American Society of Heating, Refrigeration
and Air Conditioning Engineers Handbook.
Installation of units must conform to the
ICC
standards
Mechanical Code, the International Building
Code, Installation of Air Conditioning and
Ventilating Systems Standard, NFPA 90A,
and local building, plumbing and waste
water codes. All appliances must be
electrically grounded in accordance with
local codes, or in the absence of local codes,
the
current
National
ANSI/NFPA 70 or the current Canadian
Electrical Code CSA C22.1.
CAUTION
The Clean Air Act of 1990 bans the
intentional venting of refrigerant as of
July 1, 1992. Approved methods of
recovery, recycling, or reclaiming
must be followed.
WARNING
Coils and sheet metal surfaces
present sharp edges and care must
be
taken
when
equipment.
of
the
International
Electric
Code,
working
with
Hide quick links:
Advertisement
Table of Contents
