Short Cord Instructions; Before First Use - Lagostina BW731D51 Instructions For Use Manual

A. A short power cord or a detachable power cord is provided to reduce the risks of
becoming entangled in or tripping over a longer cord accidentally.
B. Longer detachable power cords or extension cords are available and may be used if
care is exercised in their use.
C. If a long detachable power cord or an extension cord is used:
1) The marked electrical rating of the detachable power cord or extension cord
should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a grounding
type 3-wire cord.
3) The longer cord should be arranged so that it will not drape over the counter
where it can be pulled on by children or tripped over accidentally.
The appliance may have a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet
only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in
anyway.
Lagostina reserves the right to modify the characteristics or components at any time in
the interests of the consumer.
Description
A : Kettle
B : Base
C : Lid
D : Lid plastic cover
E : Limescale filter
• Remove all packaging and accessories both inside and outside the kettle.
• Adjust the length of the power cord by coiling the excess under the base. The powercord
should extend from the base through the slot in the back. (fig. 1)
• Rinse the inside of the kettle and the limescale filter (located in the spout) several times.
Boil 2 or 3 kettles of water and discard to remove all manufacturing residues and dust.
• Wipe the outside of the kettle and the base with a clean damp cloth. To avoid damage
to the electronics, avoid exposing the base of the kettle or the bottom of the kettle to
excess water.

SHORT CORD INSTRUCTIONS

F : Lid release button
G : Handle
H : Water lever indicator
I : On/Off switch

Before first use

EN
3