Maintenance; Troubleshooting - Hornbach AQUA 1100 Manual

C4
DE
C5
C6
EN
CS

6 Maintenance

SK
D

To ensure a long and problem free working life of the high pressure washer, please take the
following advices:
• Wash out water hose, high pressure hose, spray lance and accessory before mounting
• Clean the connectors of dust and sand
• Rinse the detergent bottle and the detergent nozzle
• Clean the nozzle
• Keep the water inlet fi lter clean and unclogged
Cleaning of the water inlet fi lter
D1
Carefully loosen the fi lter with a screwdriver and clean it. Check that it is intact before remount-
ing it.
Cleaning of nozzle
A clogging up in the nozzle causes a pump pressure which is too high, why cleaning is re-
quired immediately.

The nozzle cleaning tool (12) should only be used when the nozzle is detached and the ma-
chine is stopped!
D2
D3
Cleaning of machine vents
D4
Greasing of O-rings
D5

7 Troubleshooting

To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk
service organization.
Symptom
Machine refuses to
star
28
Fix the end of the hose under the snap and wind the hose up around the hose reel.
Rinse the spray lance, nozzles and the foam sprayer after use.
Place spray handle, lance, nozzles, foam sprayer and other accessories in the holders on
the high pressure washer.
See the pictorial quick reference guide - maintenance.
Clean the water inlet fi lter regularly once a month or more frequently according to use.
Stop the machine and disconnect the nozzle. Clean the nozzle.
Flush the nozzle backwards with water.
The machine should be kept clean so as to let cooling air pass freely through the ma-
chine vents.
To ensure an easy connection and that O-rings do not dry up the couplings should be
greased regularly.
Cause
Machine not plugged in
Defective socket
Fuse has blown
Defective extension cable
IMPORTANT!
Recommended action
Plug in machine
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cable.
Original Instructions