Noise/Vibration Information; Assembly; Removing The Battery - Bosch Professional GSB 120-LI Original Instructions Manual

Cordless drill/driver
A)
No-load speed
– First gear
– Second gear
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1:
h
Drilling in metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
Bosch Power Tools
-1
min
-1
min
A)
kg
°C
B)
and °C
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.

Assembly

Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Removing the battery (see figure A)
Autogoods "130"
English | 15
GSR 120-LI GSB 120-LI
0–400
0–1500
0.97
0 to +35
–20 to +50 –20 to +50
GBA 12V... GBA 12V...
GAL 12...
GAX 18...
GSR 120-LI GSB 120-LI
67
78
3
< 2.5
1.5
–
–
< 2.5
1.5
1 609 92A 5CS | (29.08.2019)
0–400
0–1500
1.1
0 to +35
GAL 12...
GAX 18...
83
94
3
< 2.5
1.5
10.5
1.5
< 2.5
1.5