Advertisement
DTX-Series CableAnalyzer
Technical Reference Handbook
Sorting Results
You can sort the list of saved results in ascending or
descending order by the following parameters:
•
PASS/FAIL result
•
Cable ID
•
Date and time the test was completed
To sort results:
1
On the View Results screen, press
D
2
Use
to highlight the field you want to sort
by.
J
3
Press
Ascending or
The sorting order applies only to the current folder.
The current sorting order is indicated at the top of the
View Results screen, as shown in Figure 8-2 on page
8-6
The default order is ascending by cable ID. The sorting
order reverts to the default when you leave the
SPECIAL FUNCTIONS mode, turn off the tester, or
upload the results to a PC.
8-8
L
Sort.
L
Descending.
Formatting a Memory Card (DTX-1800,
DTX-1200)
To format a memory card:
1
Insert the card into the slot on the left side of the
tester.
2
Turn the rotary switch to Autotest
L
3
Press
Memory.
K
4
Press
Format; then press
You can also format a memory card in SPECIAL
FUNCTIONS mode:
1
Turn the rotary switch to SPECIAL FUNCTIONS.
D
2
Use
to highlight Memory Status; then
H
press
.
K
3
Press
Format; then press
L
Yes.
L
Yes.
Advertisement
