AVERATEC D1002 User Manual page 15

Re-setting the ID Channel with Your Wireless Devices
Your wireless devices were connected and sync'd to the computer at the factory setting, so you
can use them with your computer without any additional sync'ing.
If you need to re-set the ID channel of your system and wireless devices for any reason, follow
these instructions:
Wireless keyboard
1. Press the connect button on the right side of the computer with a tip of a pencil or paperclip
for 1 to 2 seconds.
2. Press the connect button on the bottom of the wireless keyboard for 2 to 5 seconds.
Wireless mouse
1. Turn on the wireless mouse.
2. Press the connect button on the right side of the computer with a tip of a pencil or paperclip
for 1 to 2 seconds.
3. Press the connect button on the bottom of the wireless mouse for 2 to 5 seconds
6