Wiring - Scheiber BLOC 9 User's Manual And Troubleshooting Manual

Wiring

1 Allocate a number to the module 9 using the microswitches.
Microswitch
3 Connect quick connectors on plugs 1 & 2
Plug 1
5
Connect the LIN bus to the IBS
IBS sensor
2
:
Example
Allocate number 3
4
Plug 2
6
P.7
Domotique embarquée
Connect the cables of the equipment to be controlled to
the quick connectors, complying with the numbering on
the "BACK VIEW" diagram.
Front view
Back view
Connect either a connection cable with another device or a
120 Ω termination to each CAN connector.
Connect the power plug
Domotique embarquée
Embedded home automation
Terminaison 120 Ω
120 Ω termination
liaison CAN
CAN cable
Towards power
supply
S4
S3
S2
S1