Equipment Description - Scheiber BLOC 9 User's Manual And Troubleshooting Manual

Equipment description

The power bloc can control up to 6 functions
With this box, it's possible to :
- Centralize power commands of 6 electrical functions.
- Provide electrical protection for each output.
- View the status of each system through status LED.
- Physically troubleshoot each order in the event of an electronic failure.
- Receive data from 6 IBS sensors (Intelligent Battery Sensor).
- Integrate into a MULTIBLOC compatible network, and therefore be controlled by equipment of the type:
• NAVICOLOR display.
• WIFI server.
• Multiplexed switch module.
A forced operation of each output is possible using a bypass fuse (2 fuses are supplied : 15A et 25A).
The 6 power outputs are adjustable from 3 to 25A and can control 12/24 DC networks like:
- interior lights,
- navigation instruments,
- navigation lights,
- the pumps,
- comfort devices,
- etc, ...
Several modules (Bloc 9 can be installed side by side depending on the number of functions to be controlled.
LED Status
One LED per function indicates the status of the system:
- LED off: the circuit is inactive.
- LED on: the circuit is active.
Troubleshooting
The Bloc 9 has 6 fuse holders (for Mini Blade Fuse) to install the bypass for each circuit.
This solution allows each output to be overridden if there is a major failure of
the electronic system.
Electrical protection
The Bloc 9 provides electrical protection for your systems:
- Rating adjustable from 3 to 25 A according to your needs
- Reverse polarity protection (+/- battery inversion)
- Current surge protection.
Integration in a Multibloc Network
One or more Blocs 9 can be integrated in a MULTIBLOC network. A NAVICOLOR display can then be used to:
- Configure the Bloc 9 outputs
- Control the outputs
- Read the output status
- Read the IBS measurements of battery status.
This network is provided through the CAN bus.
The various Blocs 9 in the network are differentiated via the MICROSWITCH which can be used to allocate anumber in the network.
Additional function of Bloc 9 when integrated into a Multibloc network:
Fuel transfer
Associated with a Bloc 7 and a Navicolor, Bloc 9 allows operation of pumps to make fuel transfers form one tank to another one directly
from the touch screen.
P.3
Domotique embarquée
Management of IBS sensors
The bloc 9 can manage up to 6 IBS which can
transmit the following battery information:
- Voltage
- Incoming and outgoing current
- Charge and discharge current
- Battery temperature
- Residual capacity
- Ageing.
The IBS are connected to the bloc 9 through the LIN
bus. Measurements are read and alerts configured
through a NAVICOLOR display.
Domotique embarquée
Embedded home automation