Installation Instructions; Connection - Scheiber BLOC 9 User's Manual And Troubleshooting Manual

Installation instructions

• This device must be placed in a place protecting it from any risk of water splashing. Install in a ventilated location
• Do not install on supports that are sensitive to heat, such as carpet or PVC flooring, etc.
• The product must be installed away from heat and humidity
WARNING: Connection/disconnection with power on
!
Do not perform connection or disconnection with power on.
Meaning of the LEDs:
- LED off: the circuit is inactive.
- LED on: the circuit is active.
Mounting:

Connection

INPUT / POWER SUPPLY
Type of connection
Cross section
OUTPUT
Type of connection
Cross section
CAN BUS
LIN BUS
CODAGE
PROTECTION TO BE PROVIDED ON THE SUPPLY LINE
Protection rating
Protection location
3,20
Installation cutouts:
84,50 x 125,50 mm
Mounting distance :
45 x 138 mm
Mounting distance of the
138 mm
Visible thickness after mounting :
14,3 mm
Back clearance zone for connection :
80 mm (behind the product)
47,5
84,50
95
Domotique embarquée
2 screws support
Clip 8mm + connector 2-way
de 6 à 16 mm²
2 x spring connectors 6-way
6 mm²
2 x CAN connectors type 6-way Micro-Fit
1 x LIN connector type 4-way Micro-fit
With DIP SWITCH
Fuse or circuit breaker 50A maximum
Accessible and identified for the user
P.6
Domotique embarquée
Embedded home automation
: