Domotique embarquée Embedded home automation Acknowledgement We thank you for your purchase and hope that you are fully satisfied with this product. Before you use this product, we recommend you read the instructions below carefully. This manual explains how to use and install the product in accordance with its intended use. Safety Warnings WARNING: Do not disassemble the device Any contact with the product's internal components can cause injury.
Additional function of Bloc 9 when integrated into a Multibloc network: Fuel transfer Associated with a Bloc 7 and a Navicolor, Bloc 9 allows operation of pumps to make fuel transfers form one tank to another one directly from the touch screen.
Technical characteristics Domotique embarquée Embedded home automation BLOC 9 REFERENCE 41.70509.01 POWER SUPPLY 8-32 V DC up to 16 mm2 - 2 x CAN connectors type 6-way Micro-Fit DETAILS AND FEATURES OF THE INPUTS - 1 x LIN connector type 4-way Micro-Fit - 6 adjustable power outputs in current from 3 to 25A.
Page 5
Domotique embarquée Embedded home automation Front view Bypass fuse bracket Output status LED Control button Location of the labels Microswitch Bypass fuses Block status LED Side view Back view (connector mounted) Power 3,20 connector 55,3 Plug Plug (-) S3 (-) S6 (+) S6 (+) S3 (-) S5...
Installation instructions • This device must be placed in a place protecting it from any risk of water splashing. Install in a ventilated location Domotique embarquée Embedded home automation • Do not install on supports that are sensitive to heat, such as carpet or PVC flooring, etc. •...
Domotique embarquée Wiring Embedded home automation Allocate a number to the module 9 using the microswitches. Connect the cables of the equipment to be controlled to the quick connectors, complying with the numbering on Example the "BACK VIEW" diagram. Allocate number 3 Front view Microswitch Back view...
- a PC with MULTICOM software and its CAN / USB interface - the WiFi server configuration interface - a CAN / CAN SD interface with a configuration created from the Scheiber configuration software. IBS sensor How to read the measurements of an IBS sensor?
Embedded home automation In order to force the electrical function in the event of any malfunction of Bloc 9, you must install the Bypass fuse on the output concerned. In the following example we force exit S3 from Bloc 9.
RESPONSIBILITY LIMITS: In any case, the company SCHEIBER will not be held responsible for direct damages or damages not due to the normal use of the equipment. In case of a dispute arising between the parties, the case shall be submitted to the French Right to the court specified by the company SCHEIBER.
Page 11
L’innovation française depuis 1965 Question ? contact@scheiber.fr Problem ? sav@scheiber.fr 2 Bellevue, Phone : +33 (0)2 51 51 73 21 85120 • Saint-Pierre du Chemin sav@scheiber.fr www.scheiber.fr France...