Using The Lan Port - AVERATEC AV5428 User Manual

N
otebook User Guide
To connect to a audio jack:
1. Locate the audio port (Microphone, Headphone) that you want to use to
the target device.
2. Plug the jack into the port on the left side of the system.
If you use external speakers and experience the sound distortion or
feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speakers from each other, moving away the
external audio option from the unit may also help.

5.4 Using the LAN Port

This notebook comes with an internal 10Base-T/100Base-TX LAN module
that connects your computer to other computers/networks through a local
area network (LAN) and supports data transfer rates up to 100Mbps. The
10Base-T standard also called Twisted Pair Ethernet is connected with RJ-45
connectors. The 100Base-TX is based on the older Ethernet standard. Because
it is 10 times faster than Ethernet, it is often referred to as Fast Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
To connect the twisted-pair cable to your LAN port:
1. Purchase a twisted-pair cable. Each end of the cable has an RJ-45
connector.
2. Connect one end of the cable into the network wall outlet or HUB.
3. Connect the other end of the cable into the computer's RJ-45 LAN port.