Related Manuals for International Light Technologies ILT710
Summary of Contents for International Light Technologies ILT710
- Page 1 ILT710 Flicker and Illuminance Meter Operation Manual ILT710 Flicker Meter Page number 1 or 7...
- Page 2 2. Button Features 3. Taking a Measurement 3A. Taking a measurement first time users 4. Graphing 5. Battery 6. Sensor 7. USB Ports 8. Calibration 9. Warranty 10. Software 11. Formulas and Conversions ILT710 Flicker Meter Page number 2 or 7...
- Page 3 1. INTRODUCTION The ILT710 is a hand held light meter designed to measure both Illuminance (lux & fc) and Flicker Data. Its hand held ergonomic design with remote sensor allows user to view the display while sensor is moved to numerous measurement planes including hard to reach places.
- Page 4 PD to accurately measure the lux. The ILT710 offers simple operation. If all of your settings are correct, simply turn on the lamp, press and hold button 1 to turn on the meter, place the sensor in the measurement location and view the results on the display.
- Page 5 5. BATTERY The battery on the ILT710 meter is a 1200 mA hour rechargeable lithium battery that will run for up to six hours of continuous use. The Battery is rated to last for 300-500 charge cycles.
- Page 6 USB A end of the cable into a PC, USB wall plug, USB power bank or any standard mobile phone USB A charging device. The ILT710 will always turn on when power is supplied via the mini USB. It will take approximately 4 hours to charge when the battery is drained.
- Page 7 10. SOFTWARE The ILT710 software package allows the user to apply firmware updates, and to download the data saved in the device Data Download: The internal flash memory chip can save hundreds of readings. Using the PC software users can download the saved data to a PC for analysis, reporting and system verification.
Need help?
Do you have a question about the ILT710 and is the answer not in the manual?
Questions and answers