Advertisement
2. ELECTRICAL COMPONENT
SPECIFICATIONS
2.1 Circulation Pump
Brushless DC motors
• 0 – 3400 RPM range
• Winding value is immeasurable.
• Thermal protection software controlled.
• Pump output 0 - 80 l / min 0-400 mbar
• Power is from 0 - 60 watts.
Electronic card-controlled variable-speed
motor. Clockwise rotation in the opposite
direction, mounted on rubber hangers to the
base.
2.2 Drain Pump
Voltage
Frequency
Total Power
Flowrate
Coil Resistance
Coil Isolation Class : F
Thermal Protection : 120°C
2.3 Heater Casing Group
2.3.1 Heater
Voltage
Total Power
Resistance
Used for heating the wash water.
The heater is not active in the drying process.
The inlet is mounted and placed on the
leading edge of the wash pump.
2.3.2 NTC
Thermal Protection: 83±3°C
Relative Temperatures:
25°C - 5000Ω
35°C - 3300Ω
55°C - 1520Ω
63°C - 1174Ω
80°C - 670Ω
90°C - 488Ω
: 220/240 Volt
: 50/60 Hz
: 30 W
: 17 – 21 lt/min
: 143Ω ±10 Ω
: 220/240V
: 2000 W
: 23.95 ±15 Ω
±250 Ω
±181.5 Ω
±98.8 Ω
±88 Ω
±53.5 Ω
±41.5 Ω
Page 17
Advertisement
